STANDARD FEATURES
- Designed for commercial and industrial applications
- Easy to install, inspect and maintain
- Totally enclosed steel plate construction with a durable powder coat finish
- Gear train features lifetime lubrication, no oil changes required
- Heavy-duty ventilated motor with thermal overload protection or reverse phase protection
- Single phase models feature thermal overload protection
- Can be operated on 50Hz power with 16% reduction in lifting speed
- Equipped with heavy-duty chain container
- Reliable DC electromagnetic brake holds the load even if power is interrupted
- Quick-connect wiring for power and push button control
- Upper and lower limit switches prevent over-travel
SS SINGLE SPEED HEAVY DUTY ELECTRIC CHAIN HOIST
Designed for commercial and industrial applications the JET Single Speed Electric Hoists are easy to install, inspect, and maintain. The SS Hoist is equipped with a heavy duty ventilated motor available in a range of HP from 7/8 to 2-1/7. Gear trains feature lifetime lubrication eliminating the need for oil changes. All models come standard with slip clutch overload protection, chain containers and drop forged, heat treated hooks that swivel 360 degrees for easy rigging. Single phase units feature a solid state starting switch that eliminates the mechanical centrifugal mechanism and reversing switch. Quick connect wiring for power and push button controls allow for quick set-up while the DC electro-magnetic brake secures loads even if power is interrupted.
For added convenience and versatility equip the SS Series Electric Hoists with a JET ET series Electric Trolley. Available in a variety of capacities the ET Electric Trolley features the same quick-connect cords as the SS Electric Hoists allowing for fast set-up and installation.
Part Number
112000
Capacity
1 ton
Standard Lift
20 '
Load Chain (dia.)
8 mm
Hoisting Speed
19.7 fpm
Headroom
24 7/16 "
Duty Cycle Rating
25 %
Number of Falls
1
Motor Power
1¾ HP
Motor Voltage
115 / 230 V
Motor Phase
1 Ph
Web Description
1SS-1C-20, 1 TON 1PH, 20' LIFT, 115V/230V PREWIRED 230V
Model Number
1SS-1C-20
Brand
Jet
Caution
Be sure that the supporting structures and load attaching devices used in conjuntion with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting, or transporting people or lifting or supporting loads over people
Height
16 inch
Width
22 inch
Length
19.5 inch
Net Weight
174 pound
WARRANTY
- With 2 year manufacturer's warranty