The Oliver 4705 Shaper uses an interchangeable quill assembly capable of handling 3/4” or 1-1/4” spindles. With a 4” spindle travel and cutter diameters up to 8” no job is out of the question. A newly designed dovetail system for the spindle height adjustment ensures both accuracy and longevity with minimal maintenance. With the skilled woodworker in mind, Oliver put a lot of thought into its fence design. With accurately scaled micro-adjusts for the right and left fences and integral feather board hold downs the operator is sure to be pleased.
FEATURES
• Interchangeable spindles
• Digital display of spindle height
• Micro-adjustable fence with full safety features
• 7.5 or 5 HP motor
• Massive cast iron table
• Cast iron dampening base
Model No. |
4705 |
Stock No. (5HP, 1Ph) |
4705.001 |
Stock No. (7.5HP, 3Ph) |
4705.002 |
Table Dimensions |
39" x 29-1/2" |
Table Height |
36-1/2" |
Spindle Direction |
Reversible |
Spindle Speed (RPM |
5,000, 7,000, 10,000 |
Maximum Tool Diameter |
7" Below Table, 8" Above Table |
Spindle Diameter |
1-1/4" & 3/4" Interchangable |
Dust Collector Port |
4" |
Minimum CFM Required |
800 |
Motor |
5HP, 1Ph 220v or |
Shipping Dimensions (L x W x H/in.) |
39" x 31" x 45" |
Gross Weight (lbs.) |
870 lbs |