Specifications
Capacity Round (90/45deg) 8.85”/6.5”
Capacity Square (90/45deg) 8.66”/ 5.7”/3.34”
Capacity Rectangular (90deg) 10.23” x 4.33”
Blade Size (H/W/L) 1” / .035” / 96.85”
Blade speed (fpm) 66-280 variable
Blade Guide Carbide / Roller
Miter Angle 0 – 60 deg
Miter Adjustment Swivel Head
Table Height 35”
Descent Control Hydraulic
Return Manual
Drive Gear
Motor 2 hp
Power Requirement 110v
Shipping Dims (L/W/H)60” / 44” / 48”
Shipping Weight 475 lbs
The BS-250M is a single miter band saw capable of cutting up to 9 inch round metal stock. This mitering band saw can cut from zero up to sixty degree angles. It has a powerful 2 HP DC motor that delivers high torque even at slower speeds, ensuring no chattering of the blade, extending blade life. This horizontal metal cutting band saw has a direct drive gear box, meaning there are no pulleys or belts, so your blade will last longer with such a positive drive. The BS-250M has a DC variable speed drive for speeds from 66 to 280 fpm allowing the operator to precisely adjust the speed for the proper blade and material, again increasing the life of the blade and decreasing cutting rates. Like all Baileigh band saws this one includes a powerful industrial grade coolant pump that washes away chips before and after the cutting area. This cools the blade teeth, lubricates the blade, and removes the metal chips from the blade. The BS-250 band saw cuts using the pull down arm and trigger switch to activate the blade and coolant, or if your in more of a production run, you can switch the machine over to cut metal using the hydraulic descent feature that will cut through the metal using the pressure you determine and will shut down the blade and coolant when completed.
To change the miter angle takes seconds considering the change uses no tools and there are no alterations needed to the vise position. The BS-250 comes standard with a stop gauge in inches and millimeters. The vise can quickly be positioned via hand wheel and ultimately locked into position on the piece of material using a 1/4 turn taper lock coupled to the serrated clamps to assure no movement to the material being cut, this ultimately will increase blade life. The cabinet allows for a back friendly height of 35 inches and uses as little floor space as possible. Best of all this horizontal band saw requires 110 volts of power, meaning it can work in any facility in North America that has power. Perfect for small to large metal cutting machine shops and metal fabricating shops.