FEATURES
- Variable speed spindle drive with digital display
- Hi-low gear shift for spindle speed, range from 40-2,000 RPM
- Hardened & ground gears in headstock
- Directional control of carriage feed in front of apron for easy operation
- Jog button for easy engagement of gears
- Induction hardened & ground bedways for rigid structure
- Spindle supported by 2 high precision tapered roller bearings
- Carriage equipped with overload clutch to protect gears & screws
- Available for 3 phase or single phase electrics
- Electrically activated foot brake for quick stopping action
- Built-in cabinet for tools storage
STANDARD EQUIPMENT
- Coolant system
- Splash guard
- 4 way toolpost
- 6" diameter back plate
- Thread dial
- Foot brake
- Center sleeve MT #5 x #3
- Dead centers MT #3
- Tool kit
- 8" 3 jaw chuck
- Steady rest
- Tailstock
- Metric change gears
Optional accessories
- Face plate (12")
- Follow rest
- Single toolpost
- Micrometer carriage stop
- Taper attachment
- Live center (MT #3)
- Drill chuck
- Digital readout system
MODEL
1340VS
CAPACITY
Swing over bed
13"
Swing over cross slide
8 5/16"
Swing over gap
18 1/2"
Width of bed
7 1/2"
Distance between centers
40"
HEADSTOCK
Spindle nose type
D1-4 camlock
Spindle bore
1-9/16"
Spindle speeds
40 - 2,000 rpm [16]
Taper of spindle bore
MT #5
THREADS AND FEEDS
longitudinal feeds - in / rev [40]
0.0016 - 0.046"
Cross feed - in / [40]
0.0005 - 0.015"
inch threads [39)
2-56 (39)
Metric threads [42)
0.5 to 12 (42)
leadscrew pitch, diameter
8 tpi, 1"
CARRIAGE
Saddle width
12"
Apron width
11"
Cross slide width
4.5"
Cross slide travel
6 3/4"
compound rest travel
3 1/2"
compound width x length
3 x 7 1/2"
BED
Bed length
64"
Bed width
7 1/2"
TAILSTOCK
Quill travel (graduated)
4"
Quill diameter
1 9/16"
Quill taper
MT #3
GENERAL
Spindle motor (220V or 440V, 60Hz, 3 phase or single phase electrics
3 hp
Net weight (approx.)
1,550 LBS