The SH-8008-HD metal shear is built of heavy plate that is electro welded together making it a very smooth running machine even at full cutting capacity. This machine uses industrial grade hydraulics to power the top shearing cartridge through metal with ease. The top carriage is held in position via 3 axis bearing system that rides in a machine ground and hardened track that allows the machine to function so smoothly and it also dramatically increases blade life. For different thickness there is a blade gap adjustment.
This metal shear has blades with multiple cutting edges extending blade life. There are 12 hydraulic hold downs that securely hold the material and prevent it from lifting when shearing the sheet metal. The hold downs also extends blade life and prevent unnecessary upper carriage stress.
On the control panel there is a dial that allows the operator to change the rake angle of the shear blade to eliminate twisting or curling of the metal. This metal shear has a function that allows the operator to jog, complete one cycle, or have the machine run continuous cycles for high production of smaller parts. Like all Baileigh metal shears, this one will offer years of productivity to any fabrication shop.
Specifications | |
---|---|
Max. Shear Length
|
81.88 in
|
Max Material Thickness - Mild Steel *
|
.177 in
|
Max Material Thickness - Stainless Steel *
|
.137 in
|
Strokes / Minute
|
24 – 36 s.p.m.
|
Hold Down Qty.
|
12 |
Hold Down Pressure
|
6.27 ton
|
Front Gauge Length
|
39.37 in
|
Back Gauge Length
|
23.62 in (manual)
|
Blade Rake Angle
|
1/2 - 2 deg (hydraulic)
|
Blade Clearance
|
Manual Adjustment Lever
|
Motor |
10 hp
|
Power Requirement
|
220 volt / 3 phase / 60 hertz
|
Oil Capacity
|
35 gal
|
Shipping Dimensions (L/W/H)
|
129.92 / 47.24 / 64.96 in
|
Shipping Weight
|
7260 lbs
|
* Mild Steel T.S. 64,000 PSI * Stainless Steel T.S. 100,000 PSI |