DUE TO A SHORTAGE OF CASTINGS, THIS DRILL PRESS IS ON BACK ORDER FOR 6-12 MONTHS
MADE IN THE USA
Overview
|
Infinitely Variable Speed Countershaft Drive...
Dial to the best rpm for the tool and material while the job is running, with a Clausing LOW/HIGH Variable Speed Drill Press.
-
150 to 2000 rpm... speeds to drill large holes, small holes to spot face, counterbore and ream.
-
A flip of the switch changes from low range to high range, perfect for production applications with quick change tooling.
-
Greater capacity, too, with Clausing LOW/HIGH, production rated 1-7/8" in cast iron, 7/8" in steel with optional power feed.
Handle more jobs ... better, faster with a Clausing 20" LOW/HIGH drill press.
More features for superior performance...
-
Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads.
-
3 MT spindle... with 6-1/2" travel, 2-1/2" diameter quill and micrometer depth stop.
-
4" column with 1/2" thick wall for great rigidity, accuracy.
-
Precision ground 22" x 19" oil trough table, handles large parts and fixtures.
|
Specifications |
Capacity, hand feed
|
1.25" (31.75mm) dia
|
Production rated, with optional power feed, 1.5 hp motor
|
1.125" (28.6mm) in cast iron
.875" (22.2mm) in mild steel
|
Drill to center of circle
|
20" (508mm) dia.
|
Spindle nose
|
No. 3MT, 1.74" (44.2mm) OD
|
Spindle travel
|
6.5" (165mm)
|
Column
|
ground steel, 4" (102mm) dia.,
.5" (12.7mm) thick wall
|
Quill (ground steel)
|
2.5" (63.5mm) dia.
|
Quill return spring, capacity
|
40 lbs (18kg)
|
TABLE, DRILL PRESS A
|
|
Working surface
|
22" x 19.5" (559 x 495mm)
|
Table slots
|
two, 15.5" (394mm) long, for .5" (12.7mm) T-bolt
|
Table travel, one setting
|
20" (508mm)
|
Spindle to table, maximum
|
33.125" (841mm)
|
BASE, DRILL PRESS A
|
|
Working surface, ground
|
15.5" x 13" (394 x 330mm)
|
Base T-slots
|
two, 13" (330mm) long, for .5" T-bolt
|
Spindle to Base, maximum
|
43.375" (1102mm)
|
DRILL PRESS B
|
|
Column bracket to center of spindle
|
9.25" (235mm)
|
Column to center of spindle
|
10" (254mm)
|
Spindle to table, max. distance
|
25.437" (646mm)
|
Column length
|
43" (1092mm)
|
Min. center to center distance
|
20" (508mm)
|
Motor ... NEMA Frame Sizes
|
182 and 184
1.5 hp Motor 230V 3PH
|
Shipping weights, approximate, with motors
|
|
Drill press A
|
630 lbs. (286kg)
|
Drill press B
|
390 lbs. (177kg)
|
FURNISHED: No. 3 MT spindle; elevating mechanism; switch; belt guard; spindle guard .Motors and switches are installed and wired, ready to connect to power. Single phase motors have 8' three-wire cord and plug.
|