The PR-413 is the perfect plate roll for rolling sheet metal at up to 4' wide with a thickness of 13 gauge mild steel or 17 gauge stainless steel. This is a single pinch, 3 roll machine, that has a very rigid cast iron frame coupled to induction hardened rolls. This type of rigidity reduces deformation of the rolls when rolling at capacity of the machine.
This plate roll comes with an operator control panel that has foot pedal controls for forward and reverse as well as a digital display that shows the positioning of the back roll. The hydraulic back roll is controlled by up and down buttons on the operator control panel.
The PR-413 plate roller has a trip wire E-Stop around the rolling area. There also is an E-Stop button on the control panel for additional safety. Like all Baileigh sheet metal forming equipment, this one has been built to offer years of profitable production in any fabrication shop.
- Mild steel capacity is 4' wide x 13 gauge
- Stainless steel capacity is 4' wide x 17 gauge
- Single pinch
- Top roll diameter is 3-1/2"
- Hydraulic back roll
- 3 wire grooves
- Digital counter shows back roll position
- Weight is 1254 lbs
- Service requirement is 220 Volt, 1 Phase, 60 Hertz
Specifications | |
---|---|
Forming Width
|
48"
|
Capacity Mild Steel
|
13 ga
|
Upper Roll Diameter
|
3.5"
|
Minimum Forming Diameter
|
5.25"
|
Roll Adjustment Pinch
|
Manual |
Roll Adjustment Back
|
Hydraulic |
Digital Position Readout
|
Yes |
Wire Grooves
|
Yes |
Roll Speed
|
6 rpm
|
Driven Rolls
|
3 |
Motor |
2 hp
|
Power Requirement
|
220v / 1 phase
|
Shipping Dimensions (L/W/H)
|
75” / 29” / 46”
|
Shipping Weight
|
1254 lbs
|