Standard Features
-
45 Ton Punch Station (1-1/8" in 1/2")
-
Keyed Punch Ram for Safety
-
4-1/4" Throat Depth
-
2" Die Holder, Punch Nut with Wrench and Stripper
-
One Round Punch & Die: Max. Dia. 1"
-
Adjustable Electric Stroke Control with Scale
-
Three-In-One Combination Tool
Angle Shear Capacity:
3" x 3" x 5/16" at 90° and 2" x 2" x 1/4" at 45°
Bar Shear Capacity: 3/8" x 6"
Rod Shear Capacity: 3/4" Round -
Tool Table Work Area
-
Machine Stand with Punch & Die & Tooling Storage Rack
-
110 volt /1 Phase Electrics
-
All Guards Necessary to Comply with
ANSI B 11-5 Standards -
Warranty: Three Years on Parts
-
Inexpensive and portable, this machine was designed with all types of customers in mind. It can be used in all types of fabricating shops, big and small, and can also be taken on locaton to construction sites and operated using a 110 volt generator
-
Made in USA
CAPACITIES & SPECIFICATIONS
Stations: 4
•Rated Capacity (tons): 45
•Punching Capacity (Std): 1-1/8 inch OD in 1/2 inch plate, 13/32 inch OD in 3/4 inch plate
•Punching Throat Depth (inches): 4.25
•Flat Bar Shearing Max Width (inches): 3/8 x 6
•Flat Bar Shearing Max Thickness (inches): 1/2 x 4
•Angle Shear Max Size 90 Deg (inches): 3 x 3 x 5/16
•Angle Shear Max Size 45 Deg (inches): 2 x 2 x 1/4
•Throat Depth (inches): 4.25
•Special Tooling Max Cap: 2.25
•Pipe Notcher Capacity (inches): 3/4 to 2 inch
•Rectangular Notcher Capacity (inches): 2 x 1.75 x .25
•90 Deg V Notcher Capacity (inches): 6 x 6 x .125
•Rod Angle Combo Capacity (inches): 2 x 2 x 1/4
•Square Tube Shear Capacity (inches): 1/2 to 1
•Picket Tool Capacity (inches): 1/2 to 1
•Cycle Time: 1/4 inch stroke = 20 spm; 3/4 inch stroke = 6 spm
•Motor (Std): 2 hp, 110 volt, 1 phase
•Motor (Opt): 2 hp, 230 volt, 1 phase (ADD $900)
•Hydraulics: 2500 psi
•Weight (pounds): 640
•Dimensions (LxWxH): 18 x 36 x 39
Stock #012600