BAILEIGH Model BB-12010H Heavy Duty Hydraulic Box & Pan Brake 10' Length 10 GA Mild Steel 220V 3 PH
General Specifications: |
Bending Length is 120” |
Mild Steel Capacity 10 Gauge |
Stainless Steel Capacity is 14 Gauge |
Bending Angle is 0-135º |
Beam Adjustment 1” |
Minimum Reverse Bend 13/16” |
Weight is 7700 lbs |
Packing Size 155” x 45” x 72” |
220 Volt, 3-Phase, 60 Hertz |
The BB-120H hydraulic bending brake is a very powerful machine that can bend up to 10 gauge mild steel and 14 gauge stainless steel. The machine has a very rigid electro welded steel frame with massive truss rods for additional support to minimize any deformation with bending at full capacity. This box and pan brake has 26-6” fingers assorted in different sizes so the fabricator can adjust them for different box and pan applications.
This hydraulic bending brake allows the operator to dial in a programmed bend when the machine is used in the manual or semi-automatic mode. Operation of the machine can be done at the operator council by toggle or by using the foot pedal controls. The base of this model has an extra rigid design to support the weight of heavier materials. There is an adjustable table crowning devise on this heavy gauge model. The powerful industrial grade hydraulics clamp the material at the beam, lifts the leaf to the pre-programmed bend, and finally opens the beam when the bend is complete.
This is the perfect hydraulic bending brake for those production oriented fabrication shops. Heavily built to offer years of service and profit to any production shop.