|
Specifications
Capacity Round (90°/45°/60°/45°L) 8.93”/5.9”/3.54”/4.33”
Capacity Square (90°/45°/60°/45°L) 8.66”/ 5.7”/3.34”/4.33”
Capacity Rectangular (90deg) 10.59”x4.33”/7.87”x4.92”/ 6.3”x4.33”
Blade Size (H/W/L) 1” / .035” / 96.85”
Blade Speed (fpm) 66-280 variable
Blade Guide Carbide / Roller
Vise Style Dual Action, Self Centering
Miter Angle 0 – 60, 45L deg
Miter Adjustment Dual Swivel Head
Table Height 35”
Descent Control Pressure Assist Hydraulic
Return Hydraulic
Drive Gear
Motor 2 hp
Power Requirement 220v / 1 phase
Shipping Dimensions (L/W/H) 62” / 44” / 63”
Shipping Weight 890 lbs
- Semi- Automatic down feed and up feed
- Hydraulic clamping vise
- Cast iron saw head provides rigidity and swivels in two directions, 0-60 degrees (R) and 0-45 degrees (L)
- Direct gear drive helps extend saw blade life, and allows saw head to make more accurate cuts and cut faster..
- Powerful coolant pump cools blade and assists chip removal system
- Broken blade tension device shuts down machine if blade breaks.
The gear driven BS-260SA is a 9" dual miter Band Saw and is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick releases allow the operator to change the miter angle in seconds. The vise clamp uses a hand wheel coupled to a low ratio acme screw for positioning and a quick release and load hydraulic clamping system. Each semi-automatic gear driven metal cutting band saw we offer has variable speed, miter heads, hydraulic vise, and semi automatic down feed and up feed for perfect feeds and longer blade life. Our band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Each band saw has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks.
The hydraulic descent has a down feed adjustment for feed pressure. The saw head is automatically lifted when the cut is complete and is ready for the next cut. This metal band saw can cut up to 8" x 9-1/2" rectangle. These models have service requirements of 220V, Single Phase, 60 Hertz. The BS-260-SA horizontal band saw has a dual swiveling miter head, allowing the operator to miter 60 degrees in one direction and 45 degrees in the other direction. This series of horizontal band saw comes standard with a variable speed drive allowing the operator to fine tune the blade speed from 114' to 262' / min. The SA metal cutting saw series requires a 1" wide saw blade by .035" wall thickness, making this series a very precise semi-automatic miter saw. Baileigh Industrial provides quality mitering band saws at an exceptional value. Baileigh keeps this machine as well as all other machines in stock for same day shipments.
|
