|
SPECIFICATIONS
|
SH-5210 Hydraulic Shear
|
|
Cutting Length
|
52"
|
|
Mild Steel Capacity
|
10GA
|
|
Cutting Angle
|
1"40'
|
|
Strokes Per Min.
|
20
|
|
Motor
|
5 HP
|
|
Front Gauge Range
|
24"
|
|
Back Gauge Range
|
24"
|
|
Packing Size
|
76" x 36" x 55"
|
|
Shipping Weight
|
3000 Lbs
|
FEATURES
Baileigh's hydraulic shears are ruggedly built to withstand years of punishment cutting at full capacity across the entire useful cutting width of 52". Of the three hydraulic shears we carry the SH-5210 is the most powerful with a capacity to cut 10 gauge thick mild steel, or 14 gauge stainless steel. Besides basic metals the SH-5210 is perfect for cutting plastic, copper, or brass sheets and much more. This piece of equipment comes standard with high carbon chromium blades that can be resurfaced ground periodically saving the fabricator a lot of money over the life of the machine
The SH-5210 sheet metal shear is built using a simple design that allows for ease of operation, that has a very rigid frame allowing this piece of fabrication equipment to shear metal at full capacity and produces no deflection in the frame or shearing areas, meaning perfect shears every time. This model uses a foot pedal control that allows this machine to shear down when the pedal is pressed and retract when the pedal is depressed. Since the machine is a 52" wide piece of equipment there is no possibility of missed shearing on a 4' x 8' sheet.
This electric sheet metal shear requires electrical power supply of 220 volts, single phase, 60 hertz, that allows this machine to fit in most small and medium fabrication shops. There body consists of a heavy cast iron frame with heavy 4 sided tool steel quality chromium blades. The adjustable back gauge has a positive lock and this machinery comes with table gauges and front arm extensions. This piece of sheet metal shear weighs in at close to 3000 lbs meaning that there is a lot of rigidity in the frame construction that further reduces deflection throughout the cutting and shearing area.
|
