|
Specifications
|
Notch Capacity (OD)
|
.75”(min) – 2”(max)
|
|
Angle Adjustment
|
0 - 60 deg
|
|
Belt Size (L/W)
|
79" / 4"
|
|
Speed
|
5420 fpm
|
|
Motor
|
3 hp
|
|
Power Requirement
|
220 v / 1 phase
|
|
Shipping Dimensions (L/W/H)
|
60” / 44” / 68”
|
|
Power Weight
|
450 lbs
|
Baileigh Industrial is proud to introduce our new TN-400 abrasive tube and pipe notcher. This notching machine is perfect for coping the ends of ¾” OD to 2” OD tubing or pipe at almost any imaginable angle from 0 to 60 Degrees. It uses a powerful 3 hp motor that requires 220V single phase to turn the 79″ x 4″ belt at speeds of 5420′ per minute. The TN-400 can notch through tube or pipe in seconds giving you the perfect fit every time. This tubing notcher has a quick release taper lock mechanism for loosening the vise for making angle or position adjustments in seconds with no tools.
The vise carriage rides on a smooth Thompson shaft assembly for precision and ease of movement during the notching cycle. The notching lever is pivoted to make notching effortless for the operator. The vise is self centering for perfect belt positioning every time. The jaws on the vise are of a V-block design to keep the part on center with the notching spindle, to hold the part more securely. The TN-400 pipe notcher has a carriage stop for repeatable notches every time.
Baileigh Industrials abrasive tube notchers require different size mandrels for each different OD intended to notch. Mandrel changing is made easy on the TN-400. All that is required is loosening the belt tension hand wheel the operator then can change out the mandrel with a new size in seconds.
|
