STANDARD EQUIPMENT:
¨ Grinding Wheel (8” x 0.63” x 1.25”)
¨ Auto Lube System
¨ Wheel Adapter/Flange
¨ Wheel Balancing Arbor
¨ Work Light
¨ Diamond Dresser
¨ Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
¨ Wired 220v or 440v. Please specify
FEATURES:
¨ 1.5 Motor
¨ One “V” way and one flat way for longitudinal travel
¨ Both ways are hand-scraped and covered with Turcite B coating
¨ Accurate slot grinding achieved using saddle locking system
¨ Double-nut backlash eliminator
¨ Cross slide and column screws are hardened and ground to a 70 Rockwell C Hardness
¨ Wire rope driven table
¨ Main spindle run-out within 0.0001”
¨ Automatic lubrication system
SPECIFICATIONS:
ü Capacity
¨ Maximum Grinding Length 18.5”
¨ Maximum Grinding Width 6.3”
¨ Maximum Distance- Table to Spindle Center 16”
ü Table
¨ Working Surface (W x L) 6” x 18.3”
¨ Maximum Longitudinal Travel 18.9”
¨ Maximum Cross Travel 7”
ü Feed
Longitudinal Movement of Table
¨ Hand Feed per revolution 4.2”
Cross Movement of Saddle
¨ Hand Feed per Revolution 0.2”
¨ Graduation of Hand Wheel 0.001”
Vertical Movement of Wheel Head
¨ Hand feed per Revolution 0.05”
¨ Graduation of Hand Wheel 0.0001”
ü Spindle and Wheel
¨ Spindle Motor 1 ½ HP
¨ Spindle Speed 3,600 rpm
¨ Grinding Wheel Outside Diameter 8”
¨ Grinding Wheel Bore 1.25”
¨ Grinding Wheel Width 0.63”
ü General
¨ Floor Space (WxHxL) 83” x40” x 48”
¨ Net Weight 1,510 lbs
OPTIONAL ACCESSORIES:
¨ 6x18 Kanetsu Permanent Magnetic Chuck KMT-1545B $1500.00
¨ 6x18 Kanetsu Permanent Magnetic Chuck (Fine Pole) KRTW-1545 $2575.00
¨ 6x18 Kanetsu Electro-Magnetic Chuck w/Control KET-1545 $2890.00
¨ 6X18 Kanetsu Electro-Magnetic Chuck w/Control (Fine Pole) KETW-1545A $3225.00
¨ 6x18 Walker Electro-Magnetic Chuck (Fine Pole)w/ SMART-1B Control LBP-618 $4570.00
*** ALL MAGNETIC CHUCKS INCLUDE FREE INSTALLATION ***
¨ Parallel Dresser SG-05 $1170.00
¨ Balance Stand SG/SP $350.00
¨ Extra Wheel Adapter (Flange)SG-08 $285.00
¨ Coolant System (12 Gal.) w/Splash Guard CS-A $1160.00
¨ Coolant System w/Magnetic Separator & Paper Filter CS&PF&MS $3500.00
(25 GAL, 230V/460V)
¨ Coolant System w/Magnetic Separator & Paper Filter MCA40/PF $3500.00 (25 GAL, 380V)
DIGITAL READOUT SYSTEMS:
¨ Fagor 20i D.R.O. FG-SG618 $2700.00
¨ Acu-Rite 200S D.R.O. AR-SG618 $3160.00
¨ Newall DP700 D.R.O. NW-SG618 $3055.00
FACTORY INSTALLATION $660.00 NET